Liberty Tool
800-448-7479
AMERICA'S FULL SERVICE INDUSTRIAL SUPPLIER SINCE 1977

ABRASIVES & SUPER ABRASIVES
 
Diamond & CBN plated tools, compounds, slurry, wheels, dressers
 
Coated abrasives, rolls, cartridges, belts
 
Grinding wheels, Cut off
 
Rubber & resin regulating wheels
 
Abrasives-grinding wheels, depressed center wheels, etc
 
CITCO DIAMOND  
Diamond and Borazon wheels, dressers, tooling
 
DESMOND-STEPHEN      
Grinding wheel dressers, cutters
 
Dico buffing wheels & compound
 
Metalworking fluids, grinding, machining, turning, etc
 
Polishing & deburring wheels 
 
NORTON  
Grinding wheels, diamond, CBN products, belts, discs & beartex
 
OSBORN   
Nylon brushes, non-woven abrasives
 
Abrasive wheelsm cut off wheels, tool room wheels, regulating wheels
 
Cotton reinforced wheels
 
SOPKO      
Wheel mounts, quills, adapters, wheel screws
 
Coated abrasives, rolls, pads, discs, flap wheels
 
Depressed center, cut off & cup wheels 
 
Abrasive discs, non-woven abrasives, nylon brushes

CARBIDE, CERAMIC, CERMET & RELATED TOOLING
 
ADVANCED MATERIAL/TELEDYNE
Carbide preforms, blanks, etc
 
Thread milling cutters, solid & indexable
 
High performance & T.A. spade drills & holders
 
Indexable boring, grooving, threading & turning inserts & holders
 
CITCO DIAMOND
Diamond, borazon & amborite inserts
 
CJT 
Solid carbide & carbide tipped drills, end mills, reamers
 
Boring bars, boring heads, boring tools
 
Carbide inserts, indexable tooling, carbide tipped tooling
 
Carbide blanks, preforms, inserts & thread milling
 
Indexable boring bars, counterbores, countersinks, pilots
 
High performance HSS, HSCO & carbide cutting tools
 
Carbide tipped drills, end mills, reamers
 
Carbide miniature cutting tools, specialty cutting, etc
 
Cofa deburring tools, chamfer tools, etc
 
Indexable end mills, face mills, drills, boring tools, slotters & special tooling
 
Indexable drills, milling cutters, groove & cut off inserts & turning tools
 
Indexable drills, boring tools, milling cutters
 
Thin-Bit groove tools, miniature boring bars
 
Special carbide inserts, indexable ball mills
 
Cermet, ceramic & carbide indexable tooling
 
Carbide end mills, drills & reamers, HSS & carbide countersinks
 
Carbide cutting tools, end mills, blanks, threading tooling, etc
 
Carbide miniature cutting tools, special application rotary cutting tools
 
Solid carbide end mills
 
Ceramic, cermet & silicon nitride inserts, tool holders
 
Indexable form tools, circular, dovetail
 
Solid & coolant fed carbide H.P. drills
 
High performance solid carbide end mills
 
Indexalbe threading & turning tools
 
Carbide inserts, tool holders, boring vars, brazed tools, blanks
 
PCD & CBN inserts, carbide drills, carbide & cermet insert
 
TOOL FLO   
Top notch inserts, threading inserts & tool holders
 
Indexable drills, end mills, milling cutters, boring bars
 
Indexable precision engineered metal cutting products

CNC TOOL HOLDING SYSTEMS
 
Chuck jaws, Tooling columns, various workholding fixtures
 
Indexing chucks, power & manual chuck
 
BILZ  
Quick change tapping chucks, drilling chucks with coolant flow
 
CNC tooling system adapters, holders, collets
 
Jig & fixture tooling & bushings
 
Centinel multispindle drilling & tapping heads
 
CNC tooling systems, holders, collets, sleeves
 
CNC fixturing, tombstone, pallets, collets, etc
 
CNC bushings, VDI tool holders, etc
 
Indexable drills, boring tools, milling cutters
 
KPT SPERONI 
Tool measurement, presetting systems
 
Vises, tombstones, pallets & modular work holding
 
Modular drawer storage, cabinets, N/C tool storage
 
CNC tooling systems, milling & lathe accessories
 
CNC tooling systems, holders, collets, sleeves & presetting systems
 
ROHM
Chucks, mandrels, tombstones, centers, etc
 
Chuck jaws, hydraulic chucks & arbors, lathe chucks
 
SMW 
Pallet changers
 
Reversing & non-reversing tap drivers, attachments
 
VDI tool holders, BT&CT tool holders, D'andrea boring systems
 
Modular tooling systems & accessories
 
Boring systems, cato, novex modular systems
 
WIDIA  
Precision engineered metal cutting products

CUTTING TOOLS
 
High performance & T.A. spade drills & holders
 
ALVORD-POLK       
HSS reamers, standard, special
 
EDM supplies, OKI wire, poco graphite, etc
 
BAHCO        
American & swiss files, band saw blades, hand tools
 
Ejector & deep hole drilling systems
 
Rivet sets, aircraft counterbores, bucking bars
 
HSS & cobalt drills & reamers
 
HSS & cobalt drills, end mills & taps
 
Roller burnishing, sizing, finishing tape
 
Broaches, spline racks, broaching machines & precision spindles
 
Tapered HSS & carbide end mills
 
Indexable milling cutters, ball nose mills, work holding system
 
Standard die sets, die springs, pin bushings & punches
 
Drills, cutters, end mills, reamers, tapes
 
Gun drills, gun reamers & spray mist kits
 
Minuteman keyway broaches
 
Taps, Thread Mills, Gages, End Mills, Tool Holders, Precision Work holding
 
Hole deburring & chamfering tools
 
Milling cutters, end mills, drills, taps
 
Standard & special tapered reamers
 
GENERAL CHIPBREAKER
Chip control drills, coolant drills
 
GEOMETRIC THREADING TOOLS
Die heads, chasers, rolls, adjustable taps
 
Taps, dies & gages
 
Swiss files, rotary files, burrs
 
High performance HSS, HSCO & carbide cutting tools
 
High performance HSS, HSCO & carbide cutting tools
 
Carbide miniature cutting tools, specialty cutting, etc
 
Keyway broaches, bushings & shims
 
Cofa deburring tools, chamfer tools, etc
 
Indexable end mills, face mills, drills, boring tools, slotters & special tooling
 
"Slugger" Drilling cutters & machines
 
Indexable drills, boring tools, milling cutters
 
Thin-Bit groove tools, miniature boring bars
 
Combined drill & countersinks, keyseat cutters
 
KONCOR  
Drill rod, HS tool bits, flat ground stock
 
Automatic backface tools, recess tools, feedout heads
 
HSS & cobalt end mills
 
HSS & cobalt end mills
 
Counterbores, back spot facers, indexable drills
 
HSS & cobalt drill, tap, end mills, etc
 
Carbide cutting tools, end mills, blanks, threading tooling, etc
 
Carbide miniature cutting tools, special application rotary cutting tools
 
Solid carbide end mills
 
Industrial & maintenance wire brushes
 
Taps, cobalt end mills
 
Punches, pilots, die bushings, retainers
 
Twist drills, HSS & cobalt, mohawk subland drills
 
PUTNAM
HSS & cobalt end mills
 
QUALITY CHASER
Thread chasers all styles
 
Standard & special end mills, reamers, taps, gages
 
Standard & special taps
 
High performance solid carbide end mills
 
HSS & carbide tipped circular saw
 
Countersinks, rotary files, deburring tools
 
Screw machine cut-off tooling, lathes bits, quick change tooling, CNC cutting tools 
 
Band saws, hack saws, hole saws
 
TITEX TOOL    
HSS & cobalt drills, taps, micro drills, subland drills
 
Cham-bits, burr-bits, spot bits, chamfering tools
 
American & swiss pattern files
 
Spade drills, holders, counterbores, milling cutters
 
Industrial & maintenance brushes
 
Coolant fed tooling, holders
 
Special taps, dies, gages
 
Precision engineered metal cutting products

HAND & POWER TOOLS
 
Hex keys, hex key sets
 
Vise-Grip locking pliers, locking clamps, aviation snips
 
Shovels, forks, rakes, wheel barrows, etc
 
APEX  
Bits for assembly; hex, phillips, torx
 
Wrenches, sockets, pliers, torque wrenches, lathe tools
 
Division of Snap On - hand tools, power tools, etc
 
Rivet nut tools, Riveters, Lockbolt tools and accessories
 
Ball driver, hex wrenches
 
Pliers
 
Wrenches, pliers & screwdrivers
 
Abrasive belt tools, sanders, grinders & accessories
 
Hex & torx keys
 
Air grinders, sanders, chipping hammers
 
Punches & electrician tools
 
Files, burrs, pliers, file handles, tweezers
 
Bolt cutters, cable cutters, etc
 
Putty knives & scrapers
 
Wire strippers, etchers, etc
 
Electric & air tools, wrenches, pliers, clamps
 
Tapes, rules, plumb bobs, etc
 
LUTZ
File handles, file brushes
 
Aircraft tools, micro stops, air tools, quick change tooling
 
Electric power tools, drills, grinders, sawzall
 
Hammers: soft face, dead blow, steel face, handles
 
Putty Knives & scrapers
 
Pipe wrenches, pipe cutters, benders, chasers, etc
 
Hammers, knives, levels, screwdrivers, etc
 
UNIVERSAL RODAC
Air wrenches, hammers, scalers, drills, screwdrivers, sanders
 
WARREN 
Pry bars, crow bars, wrecking bars, etc
 
Soldering guns, solder, blow torches, tips, etc
 
Hand tools, wrenches, etc
 
Vise-Grip locking pliers, locking clamps, aviation snips
 
Scissors, snips, etc

INSPECTION, SPC & PRECISION MEASURING INSTR.
 
ADVANCE SPLINE & ENG.
Spline gages, master gears
 
Co-Ax indicator
 
Precision measuring tools, electronic gages - major instruments
 
J.C. BUSCH 
V-blocks, angle plates, parallels, surface plates
 
Carbide & ruby replacement contact points
 
Angle plates, surface plate equipment
 
Bore gages, internal groove gages and special application gaging
 
Air comparators, air probes & rings, precision measuring instruments
 
Precision measuring instruments, machine tool accessories
 
Precision measuring tools & equipment
 
Standard & special plug, ring, thread gages
 
Standard & special plug, ring, thread gages
 
Standard & special plug, ring, thread gages
 
Pin gages, pin gage sets
 
Precision measuring tools, major instruments, digital readout systems
 
Precision dimensional gages
 
NELSON PRECISION
Custom measuring solutions, turn key systems
 
Granite surface plates, accessories
 
SPI 
Machine tool accessories, inspection & gage equipment, shop aids
 
Precision measuring tools, micrometers, calipers
 
Precision measuring tools, surface plates, weber gage blocks
 
Standard & special plug, ring, thread gages
 
Optical comparator charts, scales & fixtures

MACHINERY
 
Balcrank jet pulser coolant systems
 
Bench & pedestal grinders, buffers, industrial motors
 
Peerless band saw machines, sawing systems
 
High pressure coolant systems
 
Vertical H-frames & horizontal hydraulic presses
 
Precision drill sharpeners
 
Tool post grinders, grinding spindles, quills
 
Lathes, drill presses, milling machines, grinders
 
Band saw & abrasive sawing machines
 
Industrial vacuum systems
 
Wet & dry vacuum cleaners
 
Abrasive belt grinders, band saws, drill presses

MACHINE ACCESSORIES
 
Digital readout system
 
Standard & special drill bushings
 
Quick change tool holders, lathe accessories
 
Quick change tapping chucks, drilling chucks with coolant flow
 
Standard & nitrided drill bushings
 
CNC tooling system adapters, holders, collets
 
Manual, power & special application chucks
 
Centinel- multi-spindle drilling & tapping heads
 
Drill, reamer & tap sleeves, holders, drivers
 
Boring bars, heads, tools
 
Soft top jaws, keys, full grip jaws, reversible hard jaws
 
Turret lathe tools, attachments & holders
 
Replaceable grippers, serrated pads
 
Vises, clamping systems
 
Live & solid centers, wheel dressers, fixture clamps
 
Chucks-keyed, keyless, accessories
 
JARVIS MACHINE TOOLS 
Tapping attachments, multi spindle drilling & tapping heads
 
Collets, adapters, rotary tables, vises, accessories
 
JUNGERE  
Tap extesnsions, multiple lengths & combinations
 
Vises, pallets, modular work holding systems
 
Storage systems, cabinets, mini-cribs, N/C tool transport
 
Clamping systems
 
Permanent magnetic chucks, equipment
 
Vises, rotary & index tables
 
Tapping heads, single & multispindle attachments
 
Live & solid centers, standard & special
 
Drill & tap extensions
 
Chucks, centers, vises, work drivers
 
Centers, collets, hex turrets, adapters, holders
 
Chuck & lathe jaws
 
Holders for screw machines, lathes & cutting tools
 
STANDARD SUPPLY
Die sets, springs, fasteners, accessories
 
Precision parallels, vbocks, angle plates, etc
 
Reversing & non-reversing tap drivers, attachments
 
Tooling components, clamping components, toggle clamps
 
Quick change drilling & tapping systems
 
Vises: Machinists, milling machine, bench, utility
 
Collets, collet fixtures
 
Floating tool holders: tapping, reaming

MAINTENANCE & SHOP SUPPLIES
 
Industrial fans; floor, pedestal & wall mount
 
Socket head cap screws, set screws, dowel pins
 
Lubrication fittings & supplies
 
Industrial air filter products
 
Gloves; maintenance, chemical, etc
 
Propane torches
 
Never-seez, adhesives, lubricants, sealants
 
Industrial gloves - all types
 
Socket head cap screws, set screws, dowel pins
 
Lubricants, cleaners, degreasers, coatings
 
Grinding wheel dressers & cutters
 
Layout fluids, hi-spot, staining fluids
 
Hand cleaner towels & scrubs
 
Oilers, safety cans
 
Batteries, flash lights, lanterns
 
Paper towels, rolls, tissues, wipes, etc
 
Hand cleaners & soaps
 
Safety air guns, air hose, fittings, etc
 
HELICOL / E-ZLOK
Thread inserts
 
Dispensers, indexes for drills, reamers, taps
 
Hoists, winches, jacks, hand truck
 
Clamps
 
Aerosol paints, rust proof paint, lubricants, etc
 
Slings: nylon, wire & chain, etc
 
Storage systems, cabinets, mini-cribs, N/C tool transport
 
Locline adjustable coolant hose
 
Adhesives, epoxies, sealers, lubricants, cleaners, coatings
 
LUTZ
File handles, file brushes
 
Steel shelving, storage racks, lockers, cabinets
 
Flat ground stock, drill rod
 
Padlocks, security hardware
 
Pins, clips, keys, o-rings, screws, washers
 
Industrial sprayers & pressure sprayers
 
Cutting, grinding & tapping coolant, oils, etc
 
Safety products, glasses, hardhats, earplugs, respirators, etc
 
NEVER-SEEZ
Sealants, lubricants, etc
 
Oil Dri sorbent pads, rolls, pillows, booms, particulate
 
Soaps, lotions & shampoos
 
Highest quality hose, cord and cable reels
 
"T" slot bolts, nuts, washers, studs, wedges
 
Cleaner & degreaser
 
SKS 
Rust inhibitor paper for storage & shipping
 
Precision ground flat stock, levels, vises
 
Machine tool accessories, inspection & gage equipment, shop aids
 
Mist coolant & tap lubricating systems, lubricating equip.
 
Lubricants, demoisturants, etc
 
Industrial & maintenance brushes
 
Tool mist, coolant systems
 
Full line of hand stamps, letters, figures

WOODWORKING MACHINERY & SUPPLIES
 
Router bits, Shaper Cutters, C.T. Saw blades, C.T. Drill bits, etc.
 
Production router bits for CNC routers machining wood, plastics, aluminum, & composites
 
Full line of woodworking machinery and accessories
 
Countersinks, Counterbores, Woodworking boring drills & specialty tooling
 
Taper Drills, Counterbores, Countersinks, Auger drill bits, etc 
 
Wood planer and jointer knives, Molding cutters, Custom cutters, etc
 
Specialty power tools and HEPA dust extraction for the woodworking & automotive industry
 
Specialty power tools featuring the "Multimaster" oscillating tool
 
Vertical panel saws for cabinet shops, Sign making, Store fixtures, Crating & shipping dept
 
Power Tools and Hand Tools
 
Woodworking Power Tools and accessories
 
Wide range of Power Tools for woodworking and metal cutting applications
 
Canadian woodworking machinery and accessories
 
Quality woodworking machinery and accessories
 
Wide array of woodworking accessories

 


 

ORDER HERE
Liberty Tool Catalog Liberty Tool Select Catalog Download

Spill Control ProductsCarr Lane Catalog Download If you would like to order from one of our download catalogs call 800.448.7479

Liberty Tool Company Inc
424 Creamery Way, Exton PA 19341 | 610-431-4950 | FAX 610-692-9860

Copyright 2009 - 2015. Liberty Tool Company Inc. All rights reserved.